Sysprof

Applicable for

STM32MP13x lines, STM32MP15x lines, STM32MP21x lines, STM32MP23x lines, STM32MP25x lines

1. Article purpose[edit | edit source]

This article provides the basic information needed to start using the Linux kernel tool: sysprof^[1].

2. Introduction[edit | edit source]

The following table provides a brief description of the tool, as well as its availability depending on the software packages:

: this tool is either present (ready to use or to be activated), or can be integrated and activated on the software package.

: this tool is not present and cannot be integrated, or it is present but cannot be activated on the software package.

Tool

STM32MPU Embedded Software distribution

STM32MPU Embedded Software distribution for Android™

Warning

No Developer Package is presently delivered.
The tool (even if marked as present) has not been yet tested with the current release.

Name

3. Installing the trace and debug tool on your target board[edit | edit source]

3.1. Using STM32MPU Embedded Software distribution[edit | edit source]

sysprof is installed by default and ready to be used with all STM32MPU Embedded Software Packages.

which sysprof
/usr/bin/sysprof

Sysprof is integrated in weston image distribution through packagegroup-framework-tools-kernel package defined in meta-st-openstlinux/recipes-st/packagegroups/packagegroup-framework-tools.bb.

SUMMARY:packagegroup-framework-tools-kernel = "Framework tools components for kernel"
RDEPENDS:packagegroup-framework-tools-kernel = "\
    cpufrequtils    \
    sysfsutils      \
    dosfstools      \
    mmc-utils       \
    blktool         \
    mtd-utils-ubifs \
    sysprof         \
    "

4. Getting started[edit | edit source]

Warning

sysprof is working only with screen resolution at least 700x1200, so it doesn't work on STM32MP135x-DK Discovery kit and STM32MP157x-DKx Discovery kit

Starting sysprof on the board: Need to specify the display to be used, for example:

sysprof --display=/run/user/1000/$WAYLAND_DISPLAY

Sysprof proposes a User interface through the board X interface to the display. It might be more convenient to plug a mouse (and optionally a keyboard) to use the tool interface.

Recording

Clicking on the top left Record button launches the recording. Recording is stopped by clicking on the top left Stop button (that replaces the record button).

The following report is then available on the board display:

5. To go further[edit | edit source]

Several options are available to the user in order to filter the report, and then study the results:

Possibility to browse on Functions list, Descendants list
Possibility to select a certain period of the CPUs graph.
Possibility to save traces, to make screen shots...

6. References[edit | edit source]

↑ ^1.0 ^1.1 http://www.sysprof.com/

Useful external links

Document link	Document Type	Description
Sysprof from Gnome	Standard	Wiki page
Profiling using Sysprof	User manual	Linux.com

[sysprofdotcom-1] 1.0 ^1.1 http://www.sysprof.com/

[1]