This article describes the content of STM32MPU-ecosystem-v6.0.0 release of Yocto-based OpenSTLinux embedded software and its associated ecosystem.
This delivery supports STM32MP1 series, STM32MP23x lines , and STM32MP25x lines .
Since the major release of STM32MPU-ecosystem-v6.0.0, the STM32MP2 starter package and the STM32MPU distribution package have been updated, and is available through minor release STM32MPU-ecosystem-v6.0.1, bringing miscellaneous improvements.
1. Delivery purpose and scope[edit | edit source]
The STM32MPU-ecosystem-v6.0.0 release is dedicated to the STM32MP1 series, the STM32MP23x lines and the STM32MP25x lines . It is a major release, based on new community components version, listed in the embedded software chapter below.
This STM32MPU-ecosystem-v6.0.0 release aims at:
- providing a full ecosystem for the STM32MP1 series
- providing a full ecosystem for the STM32MP25x lines
- providing a full ecosystem for the STM32MP23x lines New
- working efficiently with STM32 MPU boards, using one of the packages (Starter Package, Developer Package or Distribution Package) provided by STMicroelectronics: refer to Which Package better suits your needs for more information.
This ecosystem release consists of:
- STM32 MPU Embedded Software distribution
- OpenSTLinux for all MPUs,
- STM32CubeMP1 (Arm® Cortex®-M4) for STM32MP15x lines ,
- STM32CubeMP2 (Arm® Cortex®-M33 and Arm® Cortex®-M0+) for STM32MP25x lines ,
- STM32CubeMP2 (Arm® Cortex®-M33) for STM32MP23x lines ,
- TF-M (Arm® Cortex®-M33) for STM32MP2 series
- STM32DDRFW-UTIL firmware utility for all MPUs,
- STM32PRGFW-UTIL firmware utility for all MPUs,
- STM32SSP-UTIL firmware utility for all MPUs, New
- STM32 referenced tools
- STM32CubeIDE for all MPUs,
- STM32CubeMX for all MPUs,
- STM32CubeProgrammer for all MPUs,
- Keygen tool
- Signing tool
- Trusted package creator tool
- The Package Repository Service
- hosted at the non-browsable URL http://packages.openstlinux.st.com,
- enabled by default in the Starter Package,
- providing regularly updated or additional packages
- Documentation
- the present user guide in Wiki format
- the documentation package (for more details refer to Reference documents chapter below)
- STM32MPU legacy boards support
- STM32MP15 Evaluation boards
- STM32MP15 Discovery kits
- STM32MP13 Discovery kits
- STM32MP257x-EV1 Evaluation board - STM32MP257F-EV1 board Rev.D
- The STM32MP257F-EV1 board Rev.C is still supported on this Ecosystem release with some restrictions:
- Low power modes not functional
- DSI HDMI not functional (1 line DISP.DSI_INT = PD10 for CEC on EV1 Rev.D not present in Rev.C)
- The STM32MP257F-EV1 board Rev.C is still supported on this Ecosystem release with some restrictions:
- STM32MP257F-DK Discovery kit - STM32MP257F-DK board Rev.C
- More details are provided in the supported hardware chapter below.
- STM32MPU legacy microprocessors support
- New microprocessors support
2. Intended audience[edit | edit source]
The targeted audience is STM32MPU customers and partners.
3. Licensing[edit | edit source]
This software package is licensed under a SOFTWARE LICENSE AGREEMENT FOR ST MATERIALS (SLA). Customers should only use this package in compliance with the software license agreement (SLA), STM32CubeMP15 licenses, and STM32CubeMP2 licenses.
4. Supported hardware[edit | edit source]
This Ecosytem delivery is compatible with the following boards:
STM32MP13 boards | |||
---|---|---|---|
Boards | PCBs list | Main features | Ordering |
STM32MP135F-DK Discovery kit |
|
|
STM32MP15 boards | |||
---|---|---|---|
Boards | PCBs list | Main features | Ordering |
STM32MP157D-DK1 Discovery kit |
|
|
|
STM32MP157F-DK2 Discovery kit |
|
|
|
STM32MP157D-EV1 Evaluation board |
|
|
|
STM32MP157F-EV1 Evaluation board |
|
|
|
STM32MP157A-DK1 Discovery kit |
|
|
Out of production |
STM32MP157C-DK2 Discovery kit |
|
|
Out of production |
STM32MP157A-EV1 Evaluation board |
|
|
Out of production |
STM32MP157C-EV1 Evaluation board |
|
|
Out of production |
STM32MP23 boards |
---|
STM32MP25 boards | |||
---|---|---|---|
Boards | PCBs list | Main features | Ordering |
STM32MP257F-EV1 Evaluation board |
|
|
|
STM32MP257F-DK Discovery kit |
|
|
Information |
The STLINK, embedded on the boards, requires upgraded USB PC drivers: see ST-LINK article |
5. Release content[edit | edit source]
5.1. Embedded software[edit | edit source]
Embedded software | STM32MP13x lines | STM32MP15x lines | STM32MP25x lines | STM32MP23x lines |
---|---|---|---|---|
OpenSTLinux for Arm® Cortex®-A | Cortex®-A7 | Cortex®-A7 | Cortex®-A35 | Cortex®-A35 |
STM32CubeMP1 for Arm® Cortex®-M4 | ||||
STM32CubeMP2 for Arm® Cortex®-M33 | ||||
TF-M for Arm® Cortex®-M33 | ||||
STM32DDRFW-UTIL for Arm® Cortex®-A | Cortex®-A7 | Cortex®-A7 | Cortex®-A35 | Cortex®-A35 |
STM32PRGFW-UTIL for Arm® Cortex®-A | Cortex®-A7 | Cortex®-A7 | Cortex®-A35 | Cortex®-A35 |
STM32SSP-UTIL for Arm® Cortex®-A | Cortex®-A7 | Cortex®-A7 | Cortex®-A35 | Cortex®-A35 |
5.1.1. OpenSTLinux for Arm® Cortex®-A[edit | edit source]
5.0.3-openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 (Scarthgap) is the new version delivered with the STM32MPU-ecosystem-v6.0.0 release. This software set consists of the following components:
- Build process
- OpenEmbedded v5.0.3 (Scarthgap) - Updated
- GCC version v13.3.0 - Updated
- Embedded software components
- Linux kernel v6.6-stm32mp-r1 (v6.6.48) - Updated
- TF-A v2.10-stm32mp-r1 - Updated
- U-Boot v2023.10-stm32mp-r1 - Updated
- OP-TEE 4.0.0-stm32mp-r1 - Updated
- External DT 6.0-stm32mp-r1 - Updated
- OpenOCD version v0.12.0
- Applicative components
- Weston version v13.0.1 - Updated
- Wayland version 1.22.0 - Updated
- GStreamer version v1.22.12 - Updated
- GCnano version v6.4.19 - Updated
5.1.1.1. Main information[edit | edit source]
- Refer to release note: STM32 MPU OpenSTLinux release note
5.1.1.2. Main Restrictions[edit | edit source]
STM32MP1 series
- The partition layout always keeps the Firmware Update related partitions even if machine feature fw-update is disabled. To optimize the partition layout without Firmware Update feature, modifications are needed on flashlayout file generation and also on U-Boot source code in case of MTD partitions (storage mapping is hardcoded for MTD partitions, see How_to_configure_U-Boot_for_your_board#MTD_partitions)
5.1.2. STM32CubeMP1 for Arm® Cortex®-M4[edit | edit source]
Same STM32CubeMP1 v1.6.0 version as STM32 MPU ecosystem v5.1.0 release
5.1.3. STM32CubeMP2 for Arm® Cortex®-M33[edit | edit source]
New component - v1.1.0 It includes the Arm® Cortex®-M33 firmware in nonsecure context.
5.1.3.1. Main changes[edit | edit source]
- Support for STM32MP23x lines (including BSP, ResourceManager support and Examples)
- support for STM32MP25x lines 16x16 package
- Support for STM32MP25x lines Arm® Cortex®-M0+
- Demonstration project to highlight low power state transition of system when CubeFW is running from SRAM.
- Support to run Encrypted firmware.
- CMSIS version v5.9.0 - Updated
5.1.3.2. Main information[edit | edit source]
- Refer to release note: STM32CubeMP2 Package release note - v1.1.0
- Examples detailed information
- RIF configuration for Arm® Cortex®-M33 managed in external DT - Refer to External device tree article for more information.
5.1.3.3. Main restrictions[edit | edit source]
- A compilation issue is observed when we develop a project using I3C LL API and any other IP using HAL API.
- There is a fix available on Github for this compilation issue: Fix to the I3C compilation in Hybrid HAL/LL usage
5.1.4. TF-M for Arm® Cortex®-M33[edit | edit source]
New component release - v1.7.0-stm32mp25-r13 It includes the Arm®Cortex®-M33 firmware in secure context.
5.1.4.1. Main changes[edit | edit source]
- Various fixes
5.1.4.2. Main information[edit | edit source]
- Tests with TF-M-tests component - v1.7.0-stm32mp25-r13
- To install in local STM32CubeMP2/Middlewares/Third_party/trusted-firmware-m directory for usage – refer to STM32CubeIDE user guide (How to build and debug secure project on STM32MP25x lines co-processor in How_to_build_and_debug_secure_project_on_STM32MP25_co-processor_in_STM32CubeIDE).
5.1.4.3. Main restrictions[edit | edit source]
- None
5.1.5. OpenSTLinux expansion packages[edit | edit source]
OpenSTLinux expansion packages are delivered on top of OpenSTLinux releases. The detailed status of OpenSTLinux expansion packages is described in OpenSTLinux expansion packages article.
5.1.6. STM32DDRFW-UTIL for Arm® Cortex®-A[edit | edit source]
New component release - v1.2.0.
STM32DDRFW-UTIL provides DDR settings configuration and tests services.
5.1.6.1. Main changes[edit | edit source]
5.1.6.2. Main information[edit | edit source]
- Refer to release note: STM32DDRFW-UTIL release note
- BSP for STM32MP1 series and STM32MP2 series MPUs
- Utility firmware to be compiled and debugged in Cortex®-A35 Aarch64 bits with STM32CubeIDE
- To use with STM32CubeMX or in standalone
5.1.6.3. Main restrictions[edit | edit source]
- None
5.1.7. STM32PRGFW-UTIL for Arm® Cortex®-A[edit | edit source]
New component release - v1.1.2.
STM32PRGFW-UTIL provides utilities to manage the one-time programmable (OTP) memories and STPMIC Non Volative Memories (NVM).
5.1.7.1. Main changes[edit | edit source]
- Support of STPMIC automatic detection on ST boards
- Support of STM32MP23x lines through STM32MP2 series binary
5.1.7.2. Main information[edit | edit source]
- Refer to release note:STM32PRGFW-UTIL release note
- Fuses settings
- PMIC commands to read/write STPMICs NVM content
- Utility firmware to be compiled and debugged in Arm® Cortex®-A35 Aarch32 bits with STM32CubeIDE
- To use with STM32CubeProgrammer or in standalone
5.1.7.3. Main restrictions[edit | edit source]
- None
5.1.8. STM32SSP-UTIL for Arm® Cortex®-A[edit | edit source]
New component release - v1.0.0.
STM32SSP-UTIL provides utilities to program secrets into STM32 Arm® Cortex® MPUs one time programming (OTP) area in a secure way (with confidentiality, authentication and integrity checks). On STM32MP2 series, SSP also supports provisioning backup memories (BKPSRAM and backup registers).
5.1.8.1. Main information[edit | edit source]
- Refer to release note:STM32MPUSSP-UTIL release note
- Personalization packages for STM32MP1 series, STM32MP23x lines and STM32MP25x lines
- SSP firmware binary for STM32MP23x lines and STM32MP25x lines .
- Release_Notes.html with sha1 for each binary of the package.
- Package_license.html and README_license.txt with package licenses.
- README.html for installation procedure.
5.1.8.2. Main restrictions[edit | edit source]
- None
5.1.9. Buildroot for Arm® Cortex®-A[edit | edit source]
Coming soon |
5.1.10. OpenWRT for Arm® Cortex®-A[edit | edit source]
Coming soon |
5.2. Tools[edit | edit source]
5.2.1. Programming tools[edit | edit source]
5.2.1.1. STM32CubeProgrammer[edit | edit source]
STM32CubeProgrammer v2.18 version.
STM32CubeProgrammer package contains several tools, including Programmer, Signing tool, Keygen, and Trusted Package Creator.
5.2.1.1.1. Main changes[edit | edit source]
- Support of STM32MP23x lines and STM32MP25x lines (Flash memory and OTP programming, SSP support)
- Hash of (RoT Public Keys + Algo) hashes (256 bits, ROTPK) generation with KeyGen tool
- TF-A BL2 binary signature with stm32header V2.2 with Signing tool for STM32MP25 Rev Y
- FSBL encryption with Signing tool
- Signing services with PKCS#11
- OTP programming via CLI/GUI (using STM32PRGFW-UTIL firmware binary on target)
- PMIC NVM full read / write support (using STM32PRGFW-UTIL firmware binary on target)
5.2.1.1.2. Supported operating systems and architectures[edit | edit source]
- Windows® 7, 8, 10, and 11: 32 bits (x86) and 64 bits (x64)
- Linux® 64 bits (tested on Ubuntu® 64 bits)
5.2.1.1.3. Main Information[edit | edit source]
- Refer to release note: STM32CubeProgrammer release note
- Legacy MPUs and STM32MP25x lines Rev.Y support
- Flashload over UART for utilities firmware
5.2.1.1.4. Restrictions[edit | edit source]
None
5.2.1.2. STM32PRG-TOOLBOX[edit | edit source]
STM32PRG-TOOLBOX-DFU - Version v2.0.0 version - New.
STM32PRG-TOOLBOX-DFU is an open-source tool provided by STMicroelectronics. This tool automates the preparation of STM32 MPU devices through the USB DFU protocol, with the purpose to fuse OTP memory, and to run U-Boot in Fastboot mode.
The tool achieves the startup of Fastboot mode, without requiring any manual hardware setting. It is based on U-Boot script .
STM32PRG-TOOLBOX-FB - Version v2.0.0 version - New.
STM32PRG-TOOLBOX-FB is an open-source tool provided by STMicroelectronics. This tool is designed to take advantage of Fastboot high transfer bandwidth, to write into external flash memory (like eMMC, SDMMC…).
Fastboot (FB) is a protocol that was originally created for Android™ and is primarily used to modify the flash filesystem via a USB connection from a host computer.
The tool is a wrapper for Fastboot. It is specifically designed for STM32 MPU products.
5.2.1.2.1. Main features[edit | edit source]
- STM32PRG-TOOLBOX-DFU
- Install U-Boot with/without launching Fastboot mode
- OTP Fuse: Read and write operations.
- OTP management with STM32PRGFW-UTIL software tool
- Supported target memory: SD Card, eMMC
- STM32PRG-TOOLBOX-FB
- Flash the memory partitions over Fastboot interface
- Supported target memory: SD Card, eMMC
5.2.1.2.2. Supported boards[edit | edit source]
- STM32MP157x-DK and STM32MP157x-EV1 boards
- STM32MP135x-DK
- STM32MP257x-EV1 and STM32MP257x-DK
5.2.1.2.3. Supported operating systems and architectures[edit | edit source]
- Windows® 7, 8, 10, and 11: 32 bits (x86) and 64 bits (x64)
- Linux® 64 bits (tested on Ubuntu® 64 bits)
5.2.1.2.4. Restrictions[edit | edit source]
- None
5.2.2. STM32CubeMX[edit | edit source]
STM32CubeMX-6.13 version.
5.2.2.1. Main changes[edit | edit source]
- OpenSTLinux-v6.0.0 device tree generation
- STM32CubeMP2-v1.1.0 code generation
- RIF DDR settings configuration improvements
- STM32MP23x lines microprocessors
- STM32MP257F-DK Discovery kit for STM32MP23x lines evaluation
- STM32MP25 packages TFBGA361 (16x16)
5.2.2.2. Code generation[edit | edit source]
- Device trees with GPIO, internal peripherals assignment, Clocks, RIF parts for TF-A, OP-TEE, U-BOOT, Kernel software components on Arm® Cortex® A35 and software TF-M components on Arm® Cortex® M33
- STM32CubeMP2 on Arm® Cortex®M33 nonsecure context
- 2 boards STM32MP257F-EV1 & STM32MP257F-DK natively supported
5.2.2.3. Supported operating systems and architectures[edit | edit source]
- Windows® 10 and 11
- Linux®: Ubuntu® LTS 20.04 and LTS 22.04
- macOS®
5.2.2.4. Supported toolchains[edit | edit source]
STM32CubeMX generates project files for the following toolchains:
- STM32CubeIDE by STMicroelectronics
5.2.2.5. Main Information[edit | edit source]
- refer to release note: STM32CubeMX release note
- Legacy MPUs and STM32MP25x lines Rev.Y support
5.2.2.6. Main restrictions[edit | edit source]
- refer to Main Restrictions
5.2.3. STM32CubeIDE[edit | edit source]
STM32CubeIDE-v1.17 version.
5.2.3.1. Main changes[edit | edit source]
5.2.3.2. Main information[edit | edit source]
- Refer to release note: STM32CubeIDE release note
- Support for the Arm® Cortex®-M core, present in the STM32MP15x lines , STM32MP25x lines
- Support for the STM32MP23x lines New
- Support for OpenSTLinux-v6.0 and Linux® user space projects in 32-bit and 64-bit,
- Support for projects running on Arm® Cortex®-A: STM32CubeMP13 MPU Package projects or Project Utilities.
- GCC 12 as a default toolchain
- Updated to Eclipse® 2023-12
5.2.3.3. Main restrictions[edit | edit source]
- None
5.3. Miscellaneous[edit | edit source]
No specific information
6. Minor release updates[edit | edit source]
STMicroelectronics regularly delivers corrections through github® components which are U-Boot, OP-TEE, TF-A , linux kernel, external-dt .
The corrections can be incorporated into theSTM32MPU Developer Package or Distribution Package (see below).
Two possibilities exist to update a Distribution Package:
- Update your existing Distribution Package:
- Switch your Distribution Package to # github® mode .
- Use the devtool modify <recipe name> command to set up an environment. It fetches and unpacks the source code.
- In the extracted source code, use a git command such as git checkout -b WORK <github® TAG> to point to a new revision of the component.
- More rarely, STMicroelectronics also delivers fixes on layers through github®. These changes can be integrated (via git commands: git checkout -b WORK <github® commit SHA1>) into the local STM32MPU Distribution Package environment. See below the github® links of the quoted layers :
- Get a new Distribution Package:
- Refer to Installing_the_OpenSTLinux_distribution page for installing instructions, and use the repo command given for the minor version below, if it exists.
6.1. v6.0.1[edit | edit source]
Some minor release of STM32MPU OpenSTLinux distribution is available. More details can be found in STM32_MPU_OpenSTLinux_release_note_-_v6.0.0#Minor_release_updates.
7. Reference documents[edit | edit source]
7.1. STM32MP13 resources[edit | edit source]
Click on "Expand", visible on the right side of the page, to view STM32MP13 resources
All the resources for the STM32MP1 series are located in the STM32MP1 series web page.
Information |
The different STM32MP13 microprocessor part numbers available (with their corresponding internal peripherals, security options and packages) are described in the STM32MP13 microprocessor part numbers. |
Reference | Name | Link | |
---|---|---|---|
Application notes | |||
AN2834 | How to get the best ADC accuracy in STM32 microcontrollers | AN2834.pdf | |
AN4803 | High-speed SI simulations using IBIS and board-level simulations using HyperLynx® SI on STM32 MCUs and MPUs | AN4803.pdf | |
AN5027 | Interfacing PDM digital microphones using STM32 MCUs and MPUs | AN5027.pdf | |
AN5036 | Thermal management guidelines for STM32 applications | AN5036.pdf | |
AN5168 | How to configure DDR on STM32MP1 MPUs | AN5168.pdf | |
AN5225 | USB Type-C® Power Delivery using STM32 MCUs and MPUs | AN5225.pdf | |
AN5275 | USB DFU/USART protocols used in STM32MP1 series bootloaders | AN5275.pdf | |
AN5348 | Introduction to FDCAN peripherals for STM32 product classes | AN5348.pdf | |
AN5431 | The STPMIC1 PCB layout guidelines | AN5431.pdf | |
AN5438 | STM32MP1 series lifetime estimates | AN5438.pdf | |
AN5510 | Overview of the secure secret provisioning (SSP) on STM32MP1 series | AN5510.pdf | |
AN5827 | Guidelines for entering RMA state on STM32MP1 series MPUs | AN5827.pdf | |
AN4879 | USB hardware and PCB guidelines using STM32 MCUs | AN4879.pdf | |
AN5474 | Getting started with STM32MP13 series hardware development | AN5474.pdf | |
AN5475 | Migration of applications from STM32MP15x lines to STM32MP13x lines microprocessor | AN5475.pdf | |
AN5036 | Thermal management guidelines for STM32 applications | AN5036.pdf | |
AN5478 | Camera-CSI (DCMI-PP) in STM32MP13x microprocessors | AN5478.pdf | |
AN5565 | STM32MP13 lines using low-power modes | AN5565.pdf | |
AN5586 | STM32MP13x MPU product line discrete power supply hardware integration | AN5586.pdf | |
AN5587 | STM32MP13x MPU product lines and STPMIC1D / STPMIC1A integration on a wall adapter supply | AN5587.pdf | |
AN5692 | DDR memory routing guidelines for STM32MP13x product lines | AN5692.pdf | |
AN5787 | STM32MP13x product lines system power consumption | AN5787.pdf | |
UM1720 | STM32Cube USB host library user manual | UM1720.pdf | |
UM1734 | STM32Cube USB device library user manual | UM1734.pdf | |
Datasheets[4] | |||
DS12792 | STPMIC1 datasheet |
DS12792.pdf | |
DS13483 | STM32MP135C/F Datasheet (STM32MP135C/F) (secure) |
DS13483.pdf | |
DS13874 | STM32MP135A/D Datasheet (STM32MP135A/D) (non secure) |
DS13874.pdf | |
DS13875 | STM32MP133C/F Datasheet (STM32MP133C/F) (secure) |
DS13875.pdf | |
DS13876 | STM32MP133A/D Datasheet (STM32MP133A/D) (non secure) |
DS13876.pdf | |
DS13877 | STM32MP131C/F Datasheet (STM32MP131C/F) (secure) |
DS13877.pdf | |
DS13878 | STM32MP131A/D Datasheet (STM32MP131A/D) (non secure) |
DS13878.pdf | |
Errata sheets | |||
ES0539 | STM32MP13x device errata | ES0539.pdf | |
Reference manuals[4] | |||
RM0475 | STM32MP13x reference manual (STM32MP135 advanced Arm®-based 32-bit MPUs) |
RM0475.pdf | |
Boards schematics | |||
MB1635 schematics | STM32MP135F-DK motherboard schematics MB1635-E02 board schematics (Discovery kit) |
MB1635-E02.pdf | |
Boards user manuals | |||
UM2993 | STM32MP135F-DK discovery board user manual | UM2993.pdf | |
Tools user manuals | |||
UM2563 | STM32CubeIDE installation guide | UM2563.pdf | |
UM2579 | Migration guide from System Workbench to STM32CubeIDE | UM2579.pdf | |
UM2553 | STM32CubeIDE quick start guide | UM2553.pdf | |
UM2609 | STM32CubeIDE user guide | UM2609.pdf | |
UM1718 | STM32CubeMX user manual | UM1718.pdf | |
UM2237 | STM32CubeProgrammer tool user manual | UM2237.pdf | |
UM2238 | STM32 Trusted Package Creator tool user manual | UM2238.pdf | |
UM2542 | STM32 series Key Generator tool user manual | UM2542.pdf | |
UM2543 | STM32 series Signing tool user manual | UM2543.pdf | |
AN5360 | Getting started with projects based on the STM32MP1 series in STM32CubeIDE | AN5360.pdf |
7.2. STM32MP15 resources[edit | edit source]
Click on "Expand", visible on the right side of the page, to view STM32MP15 resources
All the resources for the STM32MP1 series are located in the STM32MP1 series web page.
Information |
The different STM32MP15 microprocessor part numbers available (with their corresponding internal peripherals, security options and packages) are described in the STM32MP15 microprocessor part numbers. |
Reference | Name | Link | |
---|---|---|---|
Application notes | |||
AN2834 | How to get the best ADC accuracy in STM32 microcontrollers | AN2834.pdf | |
AN4803 | High-speed SI simulations using IBIS and board-level simulations using HyperLynx® SI on STM32 MCUs and MPUs | AN4803.pdf | |
AN5027 | Interfacing PDM digital microphones using STM32 MCUs and MPUs | AN5027.pdf | |
AN5036 | Thermal management guidelines for STM32 applications | AN5036.pdf | |
AN5168 | How to configure DDR on STM32MP1 MPUs | AN5168.pdf | |
AN5225 | USB Type-C® Power Delivery using STM32 MCUs and MPUs | AN5225.pdf | |
AN5275 | USB DFU/USART protocols used in STM32MP1 series bootloaders | AN5275.pdf | |
AN5348 | Introduction to FDCAN peripherals for STM32 product classes | AN5348.pdf | |
AN5431 | The STPMIC1 PCB layout guidelines | AN5431.pdf | |
AN5438 | STM32MP1 series lifetime estimates | AN5438.pdf | |
AN5510 | Overview of the secure secret provisioning (SSP) on STM32MP1 series | AN5510.pdf | |
AN5827 | Guidelines for entering RMA state on STM32MP1 series MPUs | AN5827.pdf | |
AN5031 | Getting started with STM32MP15 Series hardware development | AN5031.pdf | |
AN5109 | STM32MP15x lines using low-power modes | AN5109.pdf | |
AN5122 | STM32MP1 series DDR memory routing guidelines | AN5122.pdf | |
AN5253 | Migration of microcontroller applications from STM32F4x9 lines to STM32MP151, STM32MP153 and STM32MP157 lines microprocessor | AN5253.pdf | |
AN5256 | STM32MP151, STM32MP153 and STM32MP157 discrete power supply hardware integration | AN5256.pdf | |
AN5260 | STM32MP151/153/157 MPU lines and STPMIC1B integration on a battery powered application | AN5260.pdf | |
AN5284 | STM32MP1 series system power consumption | AN5284.pdf | |
Datasheets[5] | |||
DS12792 | STPMIC1 datasheet |
DS12792.pdf | |
DS12505 | STM32MP157C/F datasheet (secure) |
DS12505.pdf | |
DS12504 | STM32MP157A/D datasheet (basic) |
DS12504.pdf | |
DS12503 | STM32MP153C/F datasheet (secure) |
DS12503.pdf | |
DS12502 | STM32MP153A/D datasheet (basic) |
DS12502.pdf | |
DS12501 | STM32MP151C/F datasheet (secure) |
DS12501.pdf | |
DS12500 | STM32MP151A/D datasheet (basic) |
DS12500.pdf | |
Errata sheets | |||
ES0438 | STM32MP15xx device errata | ES0438.pdf | |
Reference manuals[5] | |||
RM0436 | STM32MP157 reference manual (STM32MP157xxx advanced Arm®-based 32-bit MPUs) |
RM0436.pdf | |
RM0442 | STM32MP153 reference manual (STM32MP153xxx advanced Arm®-based 32-bit MPUs) |
RM0442.pdf | |
RM0441 | STM32MP151 reference manual (STM32MP151xxx advanced Arm®-based 32-bit MPUs) |
RM0441.pdf | |
Boards schematics | |||
MB1262 schematics | STM32MP157C-EV1 motherboard schematics MB1262-C01 board schematic (Evaluation board) |
MB1262-C01.pdf | |
MB1263 schematics | STM32MP157F-EV1 daughterboard schematics MB1263-C04 board schematic (Evaluation board) |
MB1263-C04.pdf | |
MB1230 schematics | DSI 720p LCD display daughterboard schematics
|
MB1230-C01.pdf MB1230-C02.pdf | |
MB1379 schematics | Camera daughterboard schematics MB1379-A01 board schematic (Evaluation board) |
MB1379-A01.pdf | |
MB1272 schematics | STM32MP157x-DKx motherboard schematics MB1272-DK2-C02 board schematic (Discovery kit) |
MB1272-C02.pdf | |
STM32MP157x-DKx motherboard schematics MB1272-DK2-C03 board schematic (Discovery kit) |
MB1272-C03.pdf | ||
MB1407 schematics | STM32MP157x-DKx daughterboard schematics MB1407-LCD-C01 board schematic (Discovery kit) |
MB1407-C01.pdf | |
STM32MP157x-DKx daughterboard schematics MB1407-LCD-C02 board schematic (Discovery kit) |
MB1407-C02.pdf | ||
Boards user manuals | |||
UM2534 | STM32MP157A-DK1 and STM32MP157C-DK2 Discovery kits user manual | UM2534.pdf | |
UM2535 | STM32MP157C-EV1 and STM32MP157A-EV1 Evaluation boards user manual | UM2535.pdf | |
UM2637 | STM32MP157D-DK1 and STM32MP157F-DK2 Discovery kits user manual | UM2637.pdf | |
UM2648 | STM32MP157F-EV1 and STM32MP157D-EV1 Evaluation boards user manual | UM2648.pdf | |
Tools user manuals | |||
UM2563 | STM32CubeIDE installation guide | UM2563.pdf | |
UM2579 | Migration guide from System Workbench to STM32CubeIDE | UM2579.pdf | |
UM2553 | STM32CubeIDE quick start guide | UM2553.pdf | |
UM2609 | STM32CubeIDE user guide | UM2609.pdf | |
UM1718 | STM32CubeMX user manual | UM1718.pdf | |
UM2237 | STM32CubeProgrammer tool user manual | UM2237.pdf | |
UM2238 | STM32 Trusted Package Creator tool user manual | UM2238.pdf | |
UM2542 | STM32 series Key Generator tool user manual | UM2542.pdf | |
UM2543 | STM32 series Signing tool user manual | UM2543.pdf | |
AN5360 | Getting started with projects based on the STM32MP1 series in STM32CubeIDE | AN5360.pdf |
7.3. STM32MP23 resources[edit | edit source]
Click on "Expand", visible on the right side of the page, to view STM32MP23 resources
All the resources for the STM32MP2 series are located in the STM32MP2 series web page.
Information |
The different STM32MP23 microprocessor part numbers available (with their corresponding internal peripherals, security options and packages) are described in the STM32MP23 microprocessor part numbers. |
Reference | Name | Link | |
---|---|---|---|
Application notes | |||
AN5723 | Guidelines for DDR memory configuration on STM32MP2 MPUs | AN5723.pdf | |
AN5724 | Guidelines for DDR memory routing on STM32MP2 MPUs | AN5724.pdf | |
AN5726 | STM32MP2 MPUs using low-power modes | AN5726.pdf | |
AN5729 | Guidelines for Lifetime Usage Estimates on STM32MP2 MPUs | Under preparation | |
AN5730 | Guidelines for measuring system power consumption on STM32MP2 MPUs | Under preparation | |
AN5827 | Guidelines for entering RMA state on MPU series | Under preparation | |
AN5489 | Getting started with STM32MP23/25xx MPUs hardware development | AN5489.pdf | |
AN6115 | STPMIC25 application hints | AN6115.pdf | |
AN6116 | STPMIC25 BOM details | AN6116.pdf | |
AN6128 | STPMIC25 PCB layout guidelines | AN6128.pdf | |
Datasheets[6] | |||
DS14278 | STPMIC25 datasheet |
DS14278.pdf | |
DB4995 | STM32MP23xC/F DataBrief | Please contact ST. | |
DS14634 | STM32MP23xC/F DataSheet | Please contact ST. | |
DS14635 | STM32MP23xA/D DataSheet | Please contact ST. | |
Errata sheets | |||
ES0598 | STM32MP23xx/25xx device errata | ES0598.pdf | |
Reference manuals[6] | |||
RM0457 | STM32MP23/25 reference manual (STM32MP23/25xx advanced Arm®-based 32/64-bit MPUs) |
RM0457.pdf | |
Programming manuals | |||
PM0264 | STM32 Cortex®-M33 MCUs and MPUs programming manual | PM0264.pdf | |
Boards schematics | |||
B-CAMS-IMX schematics | Camera module bundle schematics | MB1854-B01.pdf | |
B-LVDS7-WSVGA schematics | LVDS TFT LCD module schematics | b-lvds7-wsvga.html | |
STM32MP25F-DK schematics | STM32MP257F-DK board schematics example with STM32MP25F RevY 14x14 package | STM32MP257F-DK board schematics | |
DDR routing examples schematics | Additional DDR memory routing examples | DDR routing examples | |
Boards user manuals | |||
UM3385 | STM32MP257F-DK User Manual | UM3385.pdf | |
UM3354 | B-CAMS-IMX Camera module bundle User Manual | UM3354.pdf | |
Tools user manuals | |||
UM2563 | STM32CubeIDE installation guide | UM2563.pdf | |
UM2579 | Migration guide from System Workbench to STM32CubeIDE | UM2579.pdf | |
UM2553 | STM32CubeIDE quick start guide | UM2553.pdf | |
UM2609 | STM32CubeIDE user guide | UM2609.pdf | |
UM1718 | STM32CubeMX user manual | UM1718.pdf | |
UM2237 | STM32CubeProgrammer tool user manual | UM2237.pdf | |
UM2238 | STM32 Trusted Package Creator tool user manual | UM2238.pdf | |
UM2542 | STM32 series Key Generator tool user manual | UM2542.pdf | |
UM2543 | STM32 series Signing tool user manual | UM2543.pdf |
7.4. STM32MP25 resources[edit | edit source]
Click on "Expand", visible on the right side of the page, to view STM32MP25 resources
All the resources for the STM32MP2 series are located in the STM32MP2 series web page.
Information |
The different STM32MP25 microprocessor part numbers available (with their corresponding internal peripherals, security options and packages) are described in the STM32MP25 microprocessor part numbers. |
Reference | Name | Link | |
---|---|---|---|
Application notes | |||
AN5723 | Guidelines for DDR memory configuration on STM32MP2 MPUs | AN5723.pdf | |
AN5724 | Guidelines for DDR memory routing on STM32MP2 MPUs | AN5724.pdf | |
AN5726 | STM32MP2 MPUs using low-power modes | AN5726.pdf | |
AN5729 | Guidelines for Lifetime Usage Estimates on STM32MP2 MPUs | Under preparation | |
AN5730 | Guidelines for measuring system power consumption on STM32MP2 MPUs | Under preparation | |
AN5827 | Guidelines for entering RMA state on MPU series | Under preparation | |
AN5718 | Migrating from STM32MP15x to STM32MP25x MPUs | AN5718.pdf | |
AN5727 | How to use STPMIC25 for a wall adapter powered application on STM32MP25x lines MPUs | AN5727.pdf | |
AN5489 | Getting started with STM32MP23/25xx MPUs hardware development | AN5489.pdf | |
AN6115 | STPMIC25 application hints | AN6115.pdf | |
AN6116 | STPMIC25 BOM details | AN6116.pdf | |
AN6128 | STPMIC25 PCB layout guidelines | AN6128.pdf | |
Datasheets[7] | |||
DS14284 | STM32MP25xC/F Datasheet | DS14284.pdf | |
DS14285 | STM32MP25xA/D Datasheet | DS14285.pdf | |
DS14278 | STPMIC25 datasheet |
DS14278.pdf | |
Errata sheets | |||
ES0598 | STM32MP23xx/25xx device errata | ES0598.pdf | |
Reference manuals[7] | |||
RM0457 | STM32MP23/25 reference manual (STM32MP23/25xx advanced Arm®-based 32/64-bit MPUs) |
RM0457.pdf | |
Programming manuals | |||
PM0264 | STM32 Cortex®-M33 MCUs and MPUs programming manual | PM0264.pdf | |
Boards schematics | |||
STM32MP257F-EV1 schematics | STM32MP257F-EV1 board revD schematics with STM32MP25F RevB 18x18 package (MB1936) | MB1936-D01.pdf | |
B-CAMS-IMX schematics | Camera module bundle schematics | MB1854-B01.pdf | |
B-LVDS7-WSVGA schematics | LVDS TFT LCD module schematics | b-lvds7-wsvga.html | |
STM32MP25F-DK schematics | STM32MP257F-DK board schematics example with STM32MP25F RevY 14x14 package | STM32MP257F-DK board schematics | |
DDR routing examples schematics | Additional DDR memory routing examples | DDR routing examples | |
Boards user manuals | |||
UM3359 | STM32MP257F-EV1 User Manual | UM3359.pdf | |
UM3385 | STM32MP257F-DK User Manual | UM3385.pdf | |
UM3354 | B-CAMS-IMX Camera module bundle User Manual | UM3354.pdf | |
Tools user manuals | |||
UM2563 | STM32CubeIDE installation guide | UM2563.pdf | |
UM2579 | Migration guide from System Workbench to STM32CubeIDE | UM2579.pdf | |
UM2553 | STM32CubeIDE quick start guide | UM2553.pdf | |
UM2609 | STM32CubeIDE user guide | UM2609.pdf | |
UM1718 | STM32CubeMX user manual | UM1718.pdf | |
UM2237 | STM32CubeProgrammer tool user manual | UM2237.pdf | |
UM2238 | STM32 Trusted Package Creator tool user manual | UM2238.pdf | |
UM2542 | STM32 series Key Generator tool user manual | UM2542.pdf | |
UM2543 | STM32 series Signing tool user manual | UM2543.pdf |
8. How to download the software and start with this release[edit | edit source]
Supported board | Jump to |
STM32MP135x-DK Discovery kit | STM32MP13 Discovery kits - getting started, including software download |
STM32MP157x-DKx Discovery kit | STM32MP15 Discovery kits - getting started, including software download |
STM32MP157x-EV1 Evaluation board | STM32MP15 Evaluation boards - getting started, including software download |
STM32MP257F-DK Discovery kit for STM32MP23x lines evaluation | STM32MP23 Discovery kits - getting started, including software download |
STM32MP257x-DK Discovery kit | STM32MP25 Discovery kits - getting started, including software download |
STM32MP257x-EV1 Evaluation board | STM32MP25 Evaluation boards - getting started, including software download |
9. Yocto-based OpenSTLinux embedded software detailed release notes[edit | edit source]
The table below lists the software packages available in the Yocto-based OpenSTLinux embedded software and provides the corresponding release notes.
The release notes give more information and details about the features and content of the packages.
They do not explain how to download the software. Refer to How to download the software and start with this release.
Firmware | Release note | Version |
OpenSTLinux Distribution | STM32 MPU OpenSTLinux release note - v6.0.0 | openstlinux-6.6-yocto-scarthgap-mpu-v24.11.06 |
STM32CubeMP2 Package | STM32CubeMP2 Package release note - v1.1.0 | STM32CubeMP2 Package v1.1.0 |
STM32CubeMP15 Package | STM32CubeMP15 Package release note - v1.6.0 | STM32CubeMP1 Package v1.6.0 |
10. Referenced tools release notes[edit | edit source]
The table below lists the available tools, and provides links to the corresponding release notes.
Each release note gives information on how to install and use the corresponding tool.
The set of tools that can be downloaded depends on the package that is used (double check Which Package better suits your needs article for more information on each package).
Tools | Release notes | Host PC | Which Package may need the tool ? | |||
Linux® version | Windows version | Starter Package | Developer Package | Distribution Package | ||
STM32CubeIDE | STM32CubeIDE release note | v1.17 | v1.17 | ☐ | ☑ | ☐ |
STM32CubeMX | STM32CubeMX release note | v6.13 | v6.13 | ☐ | ☑ | ☑ |
STM32CubeProg | STM32CubeProgrammer release note | v2.18 | v2.18 | ☑ | ☐ | ☑ |
STM32PRG-TOOLBOX-DFU | STM32PRG-TOOLBOX-DFU release note | v2.2.0 | v2.2.0 | ☑ | ☑ | ☑ |
STM32PRG-TOOLBOX-FB | STM32PRG-TOOLBOX-FB release note | v2.0.0 | v2.0.0 | ☑ | ☑ | ☑ |
The table below lists the available embedded software utilities and provides links to the corresponding release notes.
Each release note gives information on how to flash and to use the corresponding embedded software utility/tool.
Tools | Release notes | Host PC | |
Linux® version | Windows version | ||
STM32DDRFW-UTIL | STM32DDRFW-UTIL release note | 1.2.0 | 1.2.0 |
STM32PRGFW-UTIL | STM32PRGFW-UTIL release note | 1.1.2 | 1.1.2 |
STM32SSP-UTIL | STM32SSP-UTIL release note | 1.0.0 | 1.0.0 |
11. References[edit | edit source]
- ↑ STM32MP13 microprocessor part numbers
- ↑ 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 STM32MP15 microprocessor part numbers
- ↑ 3.0 3.1 STM32MP25 microprocessor part numbers
- ↑ 4.0 4.1 The part numbers are specified in STM32MP13 microprocessor part numbers
- ↑ 5.0 5.1 The part numbers are specified in STM32MP15 microprocessor part numbers
- ↑ 6.0 6.1 The part numbers are specified in STM32MP23 microprocessor part numbers
- ↑ 7.0 7.1 The part numbers are specified in STM32MP25 microprocessor part numbers