BSEC internal peripheral

Applicable for

1. Article purpose[edit source]

The purpose of this article is to

briefly introduce the BSEC peripheral and its main features
indicate the level of security supported by this hardware block
explain how each instance can be allocated to the runtime contexts and linked to the corresponding software components
explain, when necessary, how to configure the BSEC peripheral.

2. Peripheral overview[edit source]

The BSEC peripheral is used to control an OTP (one time programmable) fuse box, used for on-chip non-volatile storage for device configuration and security parameters.

2.1. Features[edit source]

Refer to STM32MP13 reference manuals or STM32MP15 reference manuals for the complete list of features, and to the software components, introduced below, to see which features are implemented.

2.2. Security support[edit source]

The BSEC is a secure peripheral.

3. Peripheral usage and associated software[edit source]

3.1. Boot time[edit source]

The BSEC is configured at boot time to set up platform security.

3.2. Runtime[edit source]

3.2.1. Overview[edit source]

The BSEC is a system peripheral and is controlled by the Arm^® Cortex^®-A7 secure:

Information

BSEC lower OTP access can be made available to the Arm^® Cortex^®-A7 non-secure.
Upper OTP access can be managed as exceptions:

on STM32MP13x lines , using OP-TEE PTA
on STM32MP15x lines , using TF-A "secure monitor calls" or OP-TEE PTA

Please refer to BSEC device tree configuration for more details.

3.2.2. Software frameworks[edit source]

3.2.2.1. On STM32MP13x lines [edit source]

Domain	Peripheral	Software components		Comment
Domain	Peripheral	OP-TEE	Linux	Comment
Security	BSEC	OP-TEE OTP PTA	Linux NVMEM framework

3.2.2.2. On STM32MP15x lines [edit source]

Domain	Peripheral	Software components			Comment
Domain	Peripheral	OP-TEE	Linux	STM32Cube	Comment
Security	BSEC	OP-TEE OTP PTA	Linux NVMEM framework

3.2.3. Peripheral configuration[edit source]

The configuration is based on Device tree, please refer to BSEC device tree configuration article.
It can be applied by the firmware running in a secure context, done in TF-A or in OP-TEE.
It can also be configured by Linux^® kernel, please refer to NVMEM overview article.

3.2.4. Peripheral assignment[edit source]

3.2.4.1. On STM32MP13x lines [edit source]

Click on the right to expand the legend...

STM32MP13 internal peripherals

Check boxes illustrate the possible peripheral allocations supported by STM32 MPU Embedded Software:

☐ means that the peripheral can be assigned (☑) to the given runtime context.
⬚ means that the peripheral can be assigned to the given runtime context, but this configuration is not supported in STM32 MPU Embedded Software distribution.
✓ is used for system peripherals that cannot be unchecked because they are statically connected in the device.

Refer to How to assign an internal peripheral to a runtime context for more information on how to assign peripherals manually or via STM32CubeMX.
The present chapter describes STMicroelectronics recommendations or choice of implementation. Additional possiblities might be described in STM32MP13 reference manuals.

Domain	Peripheral	Runtime allocation			Comment
Domain	Peripheral	Instance	Cortex-A7 secure (OP-TEE)	Cortex-A7 non-secure (Linux)	Comment
Security	BSEC	BSEC	✓	✓

3.2.4.2. On STM32MP15x lines [edit source]