Book:Getting started

Export selection

 

Cell value has been edited

Getting started

1. Getting started

1.1. STM32MP1 boards

1.1.1. STM32MP135x-DK

1.1.1.1. Let's start

1.1.1.1.1. Unpack the STM32MP135x-DK board

1.1.1.1.2. Populate the target and boot the image

1.1.1.1.3. Execute basic commands

1.1.1.1.4. Use the demo launcher

1.1.1.2. Develop on Arm® Cortex®-A7

1.1.1.2.1. Install the SDK

1.1.1.2.2. Create a simple hello-world application

1.1.1.2.3. Modify, rebuild and reload the Linux® kernel

1.1.1.3. What's next

1.1.2. STM32MP157x-DK2

1.1.2.1. Let's start

1.1.2.1.1. Unpack the STM32MP157x-DK2 board

1.1.2.1.2. Populate the target and boot the image

1.1.2.1.3. Execute basic commands

1.1.2.1.4. Use the demo launcher

1.1.2.2. Develop on Arm® Cortex®-A7

1.1.2.2.1. Install the SDK

1.1.2.2.2. Create a simple hello-world application

1.1.2.2.3. Modify, rebuild and reload the Linux® kernel

1.1.2.3. Develop on Arm® Cortex®-M4

1.1.2.3.1. Install the IDE

1.1.2.3.2. Install STM32CubeMP1 package

1.1.2.3.3. Modify, rebuild and reload a firmware

1.1.2.4. What's next

1.1.3. STM32MP157x-EV1

1.1.3.1. Let's start

1.1.3.1.1. Unpack the STM32MP157x-EV1 board

1.1.3.1.2. Populate the target and boot the image

1.1.3.1.3. Execute basic commands

1.1.3.1.4. Use the demo launcher

1.1.3.2. Develop on Arm® Cortex®-A7

1.1.3.2.1. Install the SDK

1.1.3.2.2. Create a simple hello-world application

1.1.3.2.3. Modify, rebuild and reload the Linux® kernel

1.1.3.3. Develop on Arm® Cortex®-M4

1.1.3.3.1. Install the IDE

1.1.3.3.2. Install STM32CubeMP1 package

1.1.3.3.3. Modify, rebuild and reload a firmware

1.1.3.4. What's next

1.2. STM32MP2 boards

1.2.1. STM32MP257x-DK

1.2.1.1. Let's start

1.2.1.1.1. Unpack the STM32MP257x-DK board

Loading...