STM32MP135x-DK - board connections

This article presents the recommended connections to start with the STM32MP135F-DK Discovery kit. It is valid for the STM32MP135F-DK Discovery kit: the part numbers are specified in the STM32MP13 microprocessor part numbers article.

Warning

To successfully start the board, it is recommended to go through the corresponding Starter Package article: Category:Starter Package

1. MB1635 motherboard :STM32MP135F 11x11, PMIC, DDR3
2. MB1723 camera module
3. Camera module flat cable
4. MicroSD card slot
5. Ethernet 1 → Network
6. Ethernet 2 → Network
7. USB micro-B (ST-LINK/V3E) → PC virtual COM port and debug
8. USB Type-C (power 5V-3A)
9. USB Type-C (DRP)
10. 1st USB Type-A (host) → keyboard, mouse or USB driver
11. 2nd USB Type-A (host) → keyboard, mouse or USB driver
12. Reset button

---

STM32MP135x-DKx Discovery kit connections

STM32MP135F-DK (picture is not contractual)