Last edited 6 months ago

STM32MP257x-EV1 - board connections

Applicable for STM32MP25x lines


This article aims to present the recommended connections to start with the STM32MP257x-EV1 Evaluation boards. It is valid for the STM32MP257F-EV1 More info green.png Evaluation board : the part numbers are specified in the STM32MP25 microprocessor part numbers article.

Warning white.png Warning
To start efficiently the board, it's recommended to go through its Starter Package article: Category:Starter Package


USB Power Delivery TypeC → Power or STLINKETHERNET 2 / PHY ETH2 → Ethernet2 x USB type A (host) → E.g. mouse Keyboard USB driver...USB2.0 DRD TypeC → flashing via CubeProgrammerMicroSD card slotMB1936 5V/3A Power Supply Jack → PowerRESET Button
  1. USB Power Delivery TypeC → Power or STLINK
  2. ETHERNET 2 / PHY ETH2 → Ethernet
  3. 2 x USB type A (host) → E.g. mouse Keyboard USB driver...
  4. USB2.0 DRD TypeC → flashing via CubeProgrammer
  5. MicroSD card slot
  6. MB1936 5V/3A Power Supply Jack → Power
  7. RESET Button
STM32MP257x-EV1 Evaluation board connections

STM32MP257F-EV1 shown here (picture is not contractual)


Retrieved from "https://wiki.stmicroelectronics.cn/stm32mpu-ecosystem-v5/index.php?title=STM32MP257x-EV1_-_board_connections&oldid=108500"