STM32MP13 Discovery kits - required material

Applicable for

This article presents the mandatory and optional material needed for an STM32MP135x-DK Discovery kit. It is valid for the STM32MP135F-DK Discovery kit : the part numbers are specified in the STM32MP13 microprocessor part numbers article.

Warning

For assistance with starting up the boards, it is recommended to go through the related Starter Package articles: Category:Starter Package

Mandatory

PC	Linux^® or Windows^® operating systems. See PC prerequisites for more details on the required configurations.
STM32MP135x-DK Discovery kit	Flexible and complete development platform for the STM32MP135 microprocessor device including: an MB1635 mother board
Power supply	Including: a USB Type-C^® cable (included in the packaging) a USB Type-C^® charger (5 V, 3 A) (not included in the packaging)
microSD^™ card	Populated with OpenSTLinux distribution (Linux^® software), and providing extra storage capacity. A 2-Gbyte minimum microSD^™ card is needed.
USB Micro-B cable	To connect the STM32MP135x-DK Discovery kit to the PC through the USB Micro-B (ST-LINK/V2-1) connector.
USB Type-C^® cable	To connect the STM32MP135x-DK Discovery kit to a USB OTG device through the USB Type-C^® connector.

Optional

USB keyboard and mouse	Through its USB Type-A connectors, the STM32MP135x-DK Discovery kit can be equipped with a full-size keyboard and mouse.
Ethernet cable	To connect the STM32MP135x-DK Discovery kit to a network through the RJ45 connector.

Optional: It is possible to plug more devices and extension boards to the STM32MP135x-DK Discovery kit by means of its expansion connectors such as the GPIO expansion connector.