Last edited 4 years ago

STM32MP15 Evaluation boards - required material: Difference between revisions

VisualWikitext
Registered User
mNo edit summary
Registered User
mNo edit summary
 
(7 intermediate revisions by 2 users not shown)
Line 1: Line 1:
<noinclude>
<noinclude>
{{ArticleMainWriter|Jean-ChristopheT}}
This article aims to present the mandatory and optional material needed for an STM32MP157x-EV1 Evaluation board. It is valid for the {{Board | type=157A-EV1 | name=short}}, {{Board | type=157D-EV1 | name=short}}, {{Board | type=157C-EV1 | name=short}} and {{Board | type=157F-EV1 | name=short}} Evaluation boards: the part numbers are specified in the [[STM32MP15 microprocessor#Part number codification|STM32MP15 microprocessor part numbers]] article.
{{ReviewersList | NathalieS, BernardP, GeraldB, DenisH}}
{{ArticleApprovedVersion | Jean-ChristopheT | NathalieS (Passed, 11Dec'17) | No previous approved version | BrunoB - 26Jan'18 - 5961 | 29Jan'18}}
 
[[Category:Sub-articles]]
 
This article aims to present the mandatory and optional material needed for an STM32MP15 Evaluation board.
{{Warning|To start efficiently the board, it's recommended to go through the Starter Package article relative to your board: [[:Category:Starter Package]]}}
{{Warning|To start efficiently the board, it's recommended to go through the Starter Package article relative to your board: [[:Category:Starter Package]]}}
</noinclude>
</noinclude>


{{highlight|'''Mandatory'''}}
{{highlight|'''Mandatory'''}}
{| class="wikitable"
{| class="st-table"
|-
|-
| '''PC''' || Linux or Windows operating systems. See [[PC prerequisites]] for more details on the required configurations
| '''PC''' || Linux or Windows operating systems. See [[PC prerequisites]] for more details on the required configurations
|-
|-
| [[STM32MP157C-EV1 - hardware description#Board overview |'''STM32MP157C-EV1 Evaluation board''' <br> (board name: '''STM32MP157C-EV1''')]] || High-end development platform for the STM32MP15 microprocessor device including:
| [[STM32MP157x-EV1 - hardware description#Board overview |'''STM32MP157x-EV1 Evaluation board''']] || High-end development platform for the STM32MP15 microprocessor device including:
* a [[MB1262]] motherboard
* a [[MB1262]] motherboard
* a [[MB1263]] daughterboard
* a [[MB1263]] daughterboard
Line 23: Line 17:
| '''Power supply''' || Power supply block (5V, 3A) for the MB1263 daughterboard
| '''Power supply''' || Power supply block (5V, 3A) for the MB1263 daughterboard
|-
|-
| '''MicroSD card''' || It's populated with OpenSTLinux distribution (Linux software), and provides extra storage capacity. A 2-Gbyte minimum MicroSD card is needed
| '''MicroSD card''' || It is populated with OpenSTLinux distribution (Linux software), and provides extra storage capacity. A 2-Gbyte minimum MicroSD card is needed
|-
|-
| '''USB micro-B cable''' || It connects the STM32MP15 Evaluation board to the PC through the USB micro-B (ST-LINK/V2-1) connector
| '''USB micro-B cable''' || It connects the STM32MP157x-EV1 Evaluation board to the PC through the USB micro-B (ST-LINK/V2-1) connector
|-
|-
| '''USB micro-AB cable''' || It connects the STM32MP15 Evaluation board to an USB OTG device through the USB micro-AB connector
| '''USB micro-AB cable''' || It connects the STM32MP157x-EV1 Evaluation board to an USB OTG device through the USB micro-AB connector
|}
|}


<br>
<br>
{{highlight|'''Optional'''}}  
{{highlight|'''Optional'''}}  
{| class="wikitable"
{| class="st-table"
|-
|-
| '''USB keyboard and mouse''' || Thanks to the USB type A connectors, the STM32MP15 Evaluation board can be equipped with a full-size keyboard and mouse
| '''USB keyboard and mouse''' || Thanks to the USB type A connectors, the STM32MP157x-EV1 Evaluation board can be equipped with a full-size keyboard and mouse
|-
|-
| '''Ethernet cable''' || It can connect the STM32MP15 Evaluation board to a network through the RJ45 connector
| '''Ethernet cable''' || It can connect the STM32MP157x-EV1 Evaluation board to a network through the RJ45 connector
|-
|-
| '''RS232 cable''' || It can connect the STM32MP15 Evaluation board to the PC through the UART connector as an alternative of the ST-LINK/V2-1 connection
| '''RS232 cable''' || It can connect the STM32MP157x-EV1 Evaluation board to the PC through the UART connector as an alternative of the ST-LINK/V2-1 connection
|-
|-
| '''CAN cable''' || It can connect the STM32MP15 Evaluation board to CAN devices through the CAN FD/TT connectors
| '''CAN cable''' || It can connect the STM32MP157x-EV1 Evaluation board to CAN devices through the CAN FD/TT connectors
|-
|-
| '''Trace cable''' || It can connect the STM32MP15 Evaluation board to an external tool through the Trace connector
| '''Trace cable''' || It can connect the STM32MP157x-EV1 Evaluation board to an external tool through the Trace connector
|-
|-
| '''JTAG cable''' || It can connect the STM32MP15 Evaluation board to an external tool through the JTAG connector
| '''JTAG cable''' || It can connect the STM32MP157x-EV1 Evaluation board to an external tool through the JTAG connector
|}
|}


{{highlight|'''Optionally'''}}, devices and extension boards might be plugged to the STM32MP15 Evaluation board thanks to connectors such as:
{{highlight|'''Optionally'''}}, devices and extension boards might be plugged to the STM32MP157x-EV1 Evaluation board thanks to connectors such as:
* the Ethernet daughterboard connector
* the Ethernet daughterboard connector
* the GPIO expansion connector
* the GPIO expansion connector
* the Motor control connector
* the Motor control connector
* ...
* ...
<noinclude>
{{NoIndex}}
{{PublicationRequestId | 5961 | 2018-01-26 | BrunoB}}
[[Category:Sub-articles]]
</noinclude>

Latest revision as of 17:37, 18 May 2020↑

This article aims to present the mandatory and optional material needed for an STM32MP157x-EV1 Evaluation board. It is valid for the STM32MP157A-EV1 More info green.png, STM32MP157D-EV1 More info green.png, STM32MP157C-EV1 More info green.png and STM32MP157F-EV1 More info green.png Evaluation boards: the part numbers are specified in the STM32MP15 microprocessor part numbers article. Template:Warning


Template:Highlight

PC Linux or Windows operating systems. See PC prerequisites for more details on the required configurations
STM32MP157x-EV1 Evaluation board High-end development platform for the STM32MP15 microprocessor device including:
Power supply Power supply block (5V, 3A) for the MB1263 daughterboard
MicroSD card It is populated with OpenSTLinux distribution (Linux software), and provides extra storage capacity. A 2-Gbyte minimum MicroSD card is needed
USB micro-B cable It connects the STM32MP157x-EV1 Evaluation board to the PC through the USB micro-B (ST-LINK/V2-1) connector
USB micro-AB cable It connects the STM32MP157x-EV1 Evaluation board to an USB OTG device through the USB micro-AB connector


Template:Highlight

USB keyboard and mouse Thanks to the USB type A connectors, the STM32MP157x-EV1 Evaluation board can be equipped with a full-size keyboard and mouse
Ethernet cable It can connect the STM32MP157x-EV1 Evaluation board to a network through the RJ45 connector
RS232 cable It can connect the STM32MP157x-EV1 Evaluation board to the PC through the UART connector as an alternative of the ST-LINK/V2-1 connection
CAN cable It can connect the STM32MP157x-EV1 Evaluation board to CAN devices through the CAN FD/TT connectors
Trace cable It can connect the STM32MP157x-EV1 Evaluation board to an external tool through the Trace connector
JTAG cable It can connect the STM32MP157x-EV1 Evaluation board to an external tool through the JTAG connector

Template:Highlight, devices and extension boards might be plugged to the STM32MP157x-EV1 Evaluation board thanks to connectors such as:

  • the Ethernet daughterboard connector
  • the GPIO expansion connector
  • the Motor control connector
  • ...



Linux® is a registered trademark of Linus Torvalds.

Display Serial Interface (MIPI® Alliance standard)

USB On-The-Go (Capability/type of USB port, acting primarily as USB device, to also act as USB host. Also known as USB OTG.)

Universal Asynchronous Receiver/Transmitter

Controller Area Network (robust bus mainly used for automotive applications)

debug and test protocol, named from the Joint Test Action Group that developed it

General-Purpose Input/Output (A realization of open ended transmission between devices on an embedded level. These pins available on a processor can be programmed to be used to either accept input or provide output to external devices depending on user desires and applications requirements.)

Retrieved from "https://wiki.stmicroelectronics.cn/stm32mpu-ecosystem-v3/index.php?title=STM32MP15_Evaluation_boards_-_required_material&oldid=70743"