Populate the target and boot the image

Revision as of 17:07, 31 January 2019 by Registered User

Template:ArticleMainWriter Template:ArticleProposedVersion


STM32MP157X-DK2.png
Let's start Develop on Arm® Cortex®-A7
Step category in.png Unpack the board Step.png Populate the target and boot the image Step.png Execute basic commands Step.png Use the demo launcher Step category out.png


1. Overview

This stage will explain to you how to get, install and boot the STM32MP15 Discovery kits Starter Package.

2. Install the tools

2.1. STM32CubeProgrammer

Info white.png Information
STM32CubeProgrammer requires 1.8 version or later of the Java platfrom.

sudo apt-get install openjdk-8-jre
sudo update-alternatives --config java

Select the java-8-openjdk configuration.

  • Create your tools directory on your host computer
mkdir STM32MPU-Tools
cd STM32MPU-Tools
mkdir STM32CubeProgrammer-2.0.0
  • Download the version 2.0.0 of STM32CubeProgrammer archive file in a temporary derectory of your host computer
  • Uncompress the archive file to get the STM32CubeProgrammer installers
unzip SetupSTM32CubeProgrammer.zip
  • Execute the Linux installer, which guides you through the installation process. Select "STM32MPU-Tools/STM32CubeProgrammer-2.0.0" as the installation directory, when it's requested by the installer
./SetupSTM32CubeProgrammer-2.0.0.linux

2.2. USB serial link

3. Step 2


Back button.png Overview button.png Next button.png
Retrieved from "https://wiki.stmicroelectronics.cn/stm32mpu-ecosystem-v1/index.php?title=Getting_started/STM32MP1_boards/STM32MP157C-DK2/Let%27s_start/Populate_the_target_and_boot_the_image&oldid=51018"